Realme 5s RMX1925 Flash File (Stock Rom) Tested can be used to fix hang on the logo and remove all screen locks. This file will remove all type of screen lock like Pattern and frp after flash.Always use latest flash file to flash Realme 5s check device version by dial code *#899# in emergency dial. download the file with direct download link given below and read all flashing instructions before flashing the phone.
Realme 5s is a qualcomm model from realme. first boot in recovery mode by pressing volume down button with power key and then connect to pc with USB cable and tap on Ver 1.2 3-5 times and click OK, you device will be connect to pc in Qualcomm 9008 mode.
Oppo Realme 5s Run on Android 9.0 & it is Powered by
QCOM 665 Processor. it is a Dual SIM (GSM and GSM)
Smartphone Support Nano-SIM Cards. Connectivity options include Wi-Fi, GPS,
Bluetooth, NFC, USB OTG, FM, 3G and 4G.
The Device Come with 4GB of
RAM and 64GB of Storage Can be Expandable via SD Card. in Camera Department it
Come with 48+8+2+2MP Rear Camera With 13MP Front Shooter.
Note-
- Flashing
the ROM will erase all Your Personal Data including Storage. So we advice
You to First Make a Complete backup of
Your Phone.
- Please
Do carefully, We are Not Responsible for any Damage to Your Device.
- Ensure
that Your Device at-least 50% Charge During Flashing Process to Prevent
accidental Shut Down.
Must Require:
- backup
Your Personal data
Firmware Information-
Device Name: Realme 5s
Type: Full ROM
ROM Size: up to 5GB
SoC: QCOM SD 665
Os: Android 9
Password: Null
Gapps: Included
Root access: Not
Firmware version: RMX1911EX_11_C.57_200915_ab76f9cd
Downloads:
Firmware:
- RMX1911/25EX_11_C.61_201127::
Download
- RMX1911/25EX_11_A.27_200324:
Download
- RMX1911/25_11_A.14_190927:
Download
- a
Authorized Oppo ID Require.You can use any Patched tool or Supported box.
Flash
Tools:
usb
Driver:
- QCOM
Driver: Download
How to Install Official Firmware on Realme 5s:
- Extract ROM
File & Download tool in Same Folder
- Now
Install Correct Driver on PC
- Connect
Phone to PC with USB
- Run
MSM Download tool. it will automatically Load the Firmware if Not then
Select Firmware and then and Click Start. wait until Flashing Complete
Done. unplug Phone and bootup.
EmoticonEmoticon