What Is Modem Unlock Firmware?
Modem Unlock Firmware is a modified software program file developed by a third party. This file is specifically developed to unlock SIM locks, network locks, carrier locks, or (master) subsidy locks for Internet modem devices. After flashing this file, your device supports all companies' SIM cards.
Supported Versions:
This modified (unlocked) firmware file can unlock all versions of the E5573Cs-322 device. Below is a list of all versions that support this file.
- 21.333.64.00.1456
- 21.333.64.01.1456
- 21.333.64.02.1456
- 21.323.64.00.1456
- 21.327.64.00.1456
- 21.328.64.00.1456
- 21.329.64.00.1456
- 21.323.01.00.1456
- 21.327.62.00.1456
- 21.328.62.00.1456
- DC - Unlocker 2 Client 1.00.1366
- Driver
- Unlock Firmware
- IMEI Numeric To Command Generator Tool
- First, you need to install the modem USB drivers on your computer (if you have already installed it, skip this step).
- Turn OFF your modem device and boot into the boot mode and connect to the computer using the microdata cable, (Remove and insert the battery> Press and hold the Power+Reset button> When the modem lights flicker, it means your device is in boot mode).
- Run the Unlock Firmware file, Then a message "Application Requires Password To Start" will appear on the screen, Enter this password"filefrp.com" and click OK, As soon as you click the OK button, the flashing process will start automatically.
- After the flashing process is complete, your device will automatically restart in boot mode, now you need to change your device's IMEI number. (Your device is now unlocked to use all network SIM cards but Zong network SIM card will not work, Zong network SIM card will work smoothly when you change your device's IMEI number.)
- Run the "IMEI Numeric To Command Generator Tool" program and type your 15-digit IMEI number in the upper blank box of that tool and click the "Generate" button to generate the IMEI Write command.
- Now run the DC-Unlocker program and click on the search magnifying glass icon in the program to detect the modem device, (When your device is successfully detected in the program, copy your IMEI generated command from the box at the bottom 3 of the "IMEI Numeric To Command Generator Tool" program and paste it at the end of the DC-Unlocker program and press Enter button, When you press the Enter button, the OK will appear at the bottom new line).
- Under OK, type the reset command and press Enter. Your device will restart normally.
- Your device is now unlocked. You can now use the SIM cards of all the networks in your modem device.
These commands are for the DC Unlocker program and are used to operate the modem devices through the computer.
RESET: This command will reboot your device.
AT^RESET
GODLOAD: This command will load the drivers.
AT^GODLOAD
NVWREX: This command will write IMEI into your device.
AT^NVWREX=0,0,16, 08 06 07 00 00 09 00 00 00 09 07 08 06 01 09 00
Attention/Note!
Which files are included in the RAR compressed file?
-DC - Unlocker 2 Client 1.00.1366
AdbWinApi.dll
AdbWinUsbApi.dll
dc-unlocker2client.exe
fastboot.exe
-IMEI Numeric To Command Generator Tool
IMEI Converter.exe
-Modem USB Drivers
FcSerialDriver
HMCDriver
-FcSerialDriver
driver
devsetup32.exe
devsetup64.exe
DriverSetup.exe
DriverUninstall.exe
LocateDevice.dll
-driver
X64
X86
install.xml
-X64
fcserial.cat
FcSerial.inf
FcSerial.sys
-X86
fcserial.cat
FcSerial.inf
FcSerial.sys
-HMCDriver
Driver
DataCard_Setup.exe
DataCard_Setup64.exe
devsetup32.exe
devsetup64.exe
DriverSetup.exe
DriverUninstall.exe
LocateDevice.dll
-Driver
X64
X86
install.xml
-X64
ew_busfilter.inf
ew_cdcacm.cat
ew_cdcacm.inf
ew_cdcacm.sys
ew_cdcecm.cat
ew_cdcecm.inf
ew_cdcecm.sys
ew_cdcmdm.inf
ew_hwupgrade.cat
ew_hwupgrade.inf
ew_hwupgrade.sys
ew_hwusbdev.cat
ew_hwusbdev.inf
ew_hwusbdev.sys
ew_hwusbdevcfg.cat
ew_hwusbdevcfg.inf
ew_jubusenum.cat
ew_jubusenum.inf
ew_jubusenum.sys
ew_jucdcacm.cat
ew_jucdcacm.inf
ew_jucdcacm.sys
ew_jucdcecm.cat
ew_jucdcecm.inf
ew_jucdcecm.sys
ew_jucdcmdm.cat
ew_jucdcmdm.inf
ew_juextctrl.cat
ew_juextctrl.inf
ew_juextctrl.sys
ew_juwwanecm.cat
ew_juwwanecm.inf
ew_juwwanecm.sys
ew_usbenumfilter.cat
ew_usbenumfilter.sys
ew_wwanecm.cat
ew_wwanecm.inf
ew_wwanecm.sys
ewdcsc.cat
ewdcsc.inf
ewdcsc.sys
ewmdm2k.cat
ewmdm2k.inf
ewnet.inf
ewser2k.cat
ewser2k.inf
ewsmartcard.cat
ewsmartcard.inf
ewusbmdm.sys
ewusbnet.cat
ewusbnet.sys
ewusbwwan.cat
ewusbwwan.inf
ewusbwwan.sys
WdfCoInstaller01007.dll
-X86
ew_busfilter.inf
ew_cdcacm.cat
ew_cdcacm.inf
ew_cdcacm.sys
ew_cdcecm.cat
ew_cdcecm.inf
ew_cdcecm.sys
ew_cdcmdm.inf
ew_hwupgrade.cat
ew_hwupgrade.inf
ew_hwupgrade.sys
ew_hwusbdev.cat
ew_hwusbdev.inf
ew_hwusbdev.sys
ew_hwusbdevcfg.cat
ew_hwusbdevcfg.inf
ew_jubusenum.cat
ew_jubusenum.inf
ew_jubusenum.sys
ew_jucdcacm.cat
ew_jucdcacm.inf
ew_jucdcacm.sys
ew_jucdcecm.cat
ew_jucdcecm.inf
ew_jucdcecm.sys
ew_jucdcmdm.cat
ew_jucdcmdm.inf
ew_juextctrl.cat
ew_juextctrl.inf
ew_juextctrl.sys
ew_juwwanecm.cat
ew_juwwanecm.inf
ew_juwwanecm.sys
ew_usbenumfilter.cat
ew_usbenumfilter.sys
ew_wwanecm.cat
ew_wwanecm.inf
ew_wwanecm.sys
ewdcsc.cat
ewdcsc.inf
ewdcsc.sys
ewmdm2k.cat
ewmdm2k.inf
ewnet.inf
ewser2k.cat
ewser2k.inf
ewsmartcard.cat
ewsmartcard.inf
ewusbmdm.sys
ewusbnet.cat
ewusbnet.sys
ewusbwwan.cat
ewusbwwan.inf
ewusbwwan.sys
usbccid.cat
usbccid.inf
usbccid.sys
WdfCoInstaller01007.dll
-ZONG 4G BOLT+ Huawei E5573Cs-322 Unlock Firmware (21.333.64.02.1456)
ZONG 4G BOLT+ Huawei E5573Cs-322 Unlock Firmware (21.333.64.02.1456).exe
Download Link:
| Google Drive | One Drive | MediaFire |
- DC - Unlocker 2 Client 1.00.1366
| Google Drive | One Drive | MediaFire |
- IMEI Numeric To Command Generator Tool
- Modem USB Driver Pack (FC - Application Interface, FC - PC UI Interface)
EmoticonEmoticon